氟掺杂提高纳米二氧化钛光催化活性的研究进展

纳米二氧化钛(TiO2)具有光催化活性高、无毒、化学性质稳定、成本低等优点,是目前最具发展前景的光催化剂。但TiO2的宽禁带和低量子效率限制了它的实际应用。因此,对TiO2进行改性研究,实现TiO2的可见光响应和提高其量子效率成为研究的热点。氟掺杂不仅能够使TiO2具有可见光催化活性,而且可提高其紫外光催化活性。本文综述了氟掺杂TiO2的制备,氟掺杂提高TiO2光催化活性的机理、氟与其他元素共掺杂TiO2的研究进展。     

多羧基小分子化合物诱导阳离子囊泡聚集的研究

研究了由阳离子型肽脂质溴化N,N-二-十六烷基-Na-6-三甲胺基己酰基-L-丙氨酰胺(N+C5Ala2C16)形成的阳离子囊泡,在加入含羧基小分子化合物后形成的聚集。考察了乙二胺四乙酸(EDTA)加入到囊泡中后吸光值随时间的变化。结果表明:当EDTA增加到一定浓度时可以引起由阳离子囊泡的聚集;在加入Ca2+后,阳离子囊泡聚集体得到分散;借助电子显微镜观察到了囊泡的聚集和分散。超滤后,用高效液相色谱法确定了囊泡结合的EDTA量。考察了不同pH条件下EDTA对囊泡聚集的影响,当EDTA等含多羧基小分子化合物羧基解离数为三个或以上时能够引起囊泡的聚集,而少于三个时囊泡不能发生聚集。     

Counter-current flame propagation in a cylindrical bed of activated carbon saturated with artificial volatile matter in an upward flow of O2/N2 mixture

A counter-current flame propagation process, or traverse combustion, in a cylindrical bed packed with activated carbon (AC) saturated with artificial volatiles was studied experimentally to appreciate the effect of homogenous volatile oxidation in the combustion process of packed solid. The experiments were conducted with an upward flow of a 50/50 v/v O₂/N₂ mixture. Flame propagation velocity and total carbon consumption during traverse combustion period, from ignition to the time when the flame propagated to the bed bottom, were determined. Ethanol, isooctane and benzene, were used respectively as the artificial volatile. Results show that compared to the case of AC alone, the flame propagation velocity was reduced while the combustion duration extended in the presence of volatile. The visible gas phase flame due to homogeneous volatile combustion traversed in the opposite direction of the oxidizing gas stream, competing with heterogeneous carbon oxidation for available oxygen. The proportion of oxygen consumed by homogeneous oxidation was the highest for ethanol, up to 87–94%, while isooctane and benzene accounted for 30–65% and 27–63%, respectively. Despite the competing homogeneous volatile combustion, the total amount of carbon consumed in the heterogeneous carbon oxidation was even increased in the cases of isooctane and benzene due to the extended combustion durations and relatively higher proportions of O₂ consumed by heterogeneous carbon oxidation than in the ethanol case.     

新乐工业新区土壤中多种元素的测定

采用湿法消解对不同厂区的土壤进行前处理,应用电感耦合等离子体原子发射光谱法(ICP-OES)测定土壤中的金属元素含量,使用原子荧光光谱法AFS测定砷的含量,测定的相对标准偏差为0.8%～3.0%,回收率为89.0%～105.5%。实验表明,方法简单快速、准确,较高的灵敏度和较低的检出限,均能满足土壤中多元素分析的要求。     

瞬变流中气泡动力过程研究

微气泡的生成等基础问题制约着鼓泡脱气技术的发展。本文基于对文丘里鼓泡器内流场的研究,对不同雷诺数下的气泡动力特性进行研究,采用大涡模拟和流体体积法相结合的数值模拟方法,对气泡在不同瞬时动态变化流场下的动力特性进行研究,通过分析气泡在不同湍流下的表面积,气泡球度,以及气泡表面所处的湍流应力,计算气泡所受的破坏应力与聚合应力之比,得到气泡的临界韦伯数随气泡在瞬变湍流中的变化过程,分析气泡破碎的临界条件。     

智能蜂窝状有序多孔薄膜：体系构建、响应性能及应用探索

蜂窝状有序多孔膜是一种典型的具有微、纳米尺寸的图案化高分子薄膜材料,在超疏水表面、光电材料、组织工程、生物医学、传感器等领域都具有良好的应用前景。表面形貌或性质具有可逆刺激响应特性的智能型多孔膜不仅拥有常规多孔膜的性能,而且还拥有独特的"开-关"功能,因此受到广泛关注。本文回顾了智能有序多孔膜近年的研究进展,重点对其体系构建、响应方式、机理、性能和相关应用进行了归纳与分析,评述了不同刺激响应多孔膜的特点及优劣势,探讨了智能多孔膜的优化设计及提高响应性能等问题,指出了目前面临的挑战,并展望了未来的发展方向。     

Cu0NPs@CMC: an efficient recoverable nanocatalyst for decarboxylative A3 and A3 couplings under neat condition

Research on Chemical Intermediates - Copper nanoparticles assembled on carboxymethylcellulose (Cu0NPs@CMC) were successfully synthesized and well characterized by FT-IR, SEM, EDS, TEM, XPS, and...     

A STUDY OF LOW CYCLE FATIGUE PROPERTIES OF MATERIALS BASED ON THE FUNNEL-SHEET SPECIMENS1)

根据能量等效方法,针对漏斗薄片试样,提出了关联Ramberg-Osgood 幂律参数、试样几何参数的载荷-位移半解析统一模型。采用有限元数值模拟,正、反向验证了该模型的有效性。在此基础上,提出了通过漏斗薄片试样低循环试验实现材料低周疲劳性能的预测方法。基于薄片试样低循环试验数据,完成了SS316L, N18及SAPH440 三种材料的低周疲劳性能预测,预测结果与标准试样试验结果具有良好的一致性。并利用该方法完成了N18与SAPH在不同温度条件下的低周疲劳性能预测。     

Single-axis ultrasound levitation system with annular clamping forces

Based on the principle of acoustic levitation,a single-axis ultrasonic levitation system(SAULS) with convex sides was designed.A normal SAULS only provides a levitation force(LF) against the gravity of the sample.While,such systems also provide an annular clamping force(ACF) surrounding the levitated samples,and improve levitation stability of samples in the standing wave field.Using the finite-difference time-domain method,we investigated the force distributions in different resonance cavities and the factors that influence the magnitude of the levitation force in optimizing the SAULS and the ACF.The theoretical analyses and experimental results indicate that the stability of levitation in this special SAULS is improved with the ACF from its designed convex-side feature.It can be developed into a simple device in levitating and moving samples steadily in related experiments and applications.     

卤化钙钛矿太阳能电池材料理论研究进展

卤化钙钛矿由于具有低成本、高效率等特点,最近作为非常有前景的太阳能电池吸收层材料被广泛研究。卤化钙钛矿型太阳能电池效率在短短的几年间由3.8%(2009年)迅速增加到22.1%(2016年)。卤化钙钛矿型太阳能电池的出现彻底改变了太阳能电池领域,不仅因为它们快速增长的效率,而且因为它们在材料生长和结构方面的可控性。卤化钙钛矿型太阳能电池的优越性能说明卤化钙钛矿材料具有独特的物理性质。在本综述中,我们总结了卤化钙钛矿材料最近几年在结构、电学、光学方面的理论研究成果,这些都与它们在太阳能电池方面的应用密切相关。我们也将探讨一些卤化钙钛矿型太阳能电池目前遇到的挑战以及可能的理论解决途径。